K-KOLST LOSE ZYL

Rodless cylinders

The product image may differ

Modelo 3D

Working pressure

1 to 8 bar

Internal/external strap

stainless steel

Seal

NBR for speeds up to maximum 1 m/s

Descarregar PDF

Selecione uma versão

Exibir tabela de artigos

K- 07 15 07 34 K- 07 15 07 35 K- 07 15 07 36 K- 07 15 07 37 K- 07 15 07 38 K- 07 15 07 39 K- 07 15 07 40 K- 07 15 07 41 K- 07 15 07 42 K- 07 15 07 43 K- 07 15 07 44 K- 07 15 07 45 K- 07 15 07 46 K- 07 15 07 47 K- 07 15 07 48 K- 07 15 07 49 K- 07 15 07 50 K- 07 15 07 51 K- 07 15 07 52 K- 07 15 07 53 K- 07 15 07 54 K- 07 15 07 55 K- 07 15 07 56 K- 07 15 07 57 K- 07 15 07 58 K- 07 15 07 59 K- 07 15 07 60 K- 07 15 07 61 K- 07 15 07 62 K- 07 15 07 63 K- 07 15 07 64 K- 07 15 07 65 K- 07 15 07 66 K- 07 15 07 67 K- 07 15 07 68 K- 07 15 07 69 K- 07 15 07 70 K- 07 15 07 71 K- 07 15 07 72 K- 07 15 07 73 K- 07 15 07 74 K- 07 15 07 75 K- 07 15 07 76 K- 07 15 07 77 K- 07 15 07 78 K- 07 15 07 79 K- 07 15 07 80 K- 07 15 07 81 K- 07 15 07 82 K- 07 15 07 83 K- 07 15 07 84 K- 07 15 07 85 K- 07 15 07 86 K- 07 15 07 87 K- 07 15 07 88 K- 07 15 07 89 K- 07 15 07 90 K- 07 15 07 91 K- 07 15 07 92 K- 07 15 07 93 K- 07 15 07 94 K- 07 15 07 95 K- 07 15 07 96 K- 07 15 07 97 K- 07 15 07 98

Our customer service: +49-421-48907-766

Propriedades

Working pressure

1 to 8 bar

Internal/external strap

stainless steel

Seal

NBR for speeds up to maximum 1 m/s

Slide table (piston guide)

aluminium alloy, anodised

Housing

profiled tube from aluminium, anodised

Media

Filtered (50 µm), unlubricated or lubricated compressed air. If lubrication is used, it must be continuously lubricated.

Temp. range

-15 °C to +80 °C

Customs tariff number

84123100

Todas as propriedades

Product description

Avisos

Further information on request.

Descrição

These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.

Informações adicionais

Important: The scope of supply does not include a connector. Please order separately.

Aviso sobre encomendas

All stroke lengths up to max. 5000 mm (Ø 16) respectively 5700 mm (from Ø 25) are available in 1-mm steps. Versions with integrated linear guidance are available upon request (up to 50x lateral load possible).